HAUTEUR WALL CARE PUTTY
Hauteur Wall care putty is a white cement based product with re-permissible polymer and functional additives for application on interior and exterior rough plaster to give a smooth finish
BENEFITS
- Ease of application
- Good work ability
- Improved adhesion
- It is resistant to moisture
- Good tensile adhesion strength, compressive strength and extramural strength
- Resists growth of algae and fungi on wall
- Wall putty provides a smoother finish
- Wall putty increase the lifespan of the wall paint
SUITABLE FOR
- For Exterior and Interior before paint application
- Can be used for repair cracks on wall
PACKAGING
- Product available in 40 kg bag
- Bag color – Blue
- Appearance of product – white powder
USAGE INSTRUCTIONS
- Scrap off or sand down chips, flakes and bumps. If working with older walls use a paint scraper/ coarse sand paper 40-60 grit to remove loose chips and flacking paint
- Use a dry brush over the entire wall to remove any remaining chips/flacks. Wipe and moisten the wall with a clean sponge and water.
- Add 40-45 % of water by volume to the hauteur wall care putty powder.
- Mix thoroughly using mechanical stirrer to make a homogeneous past. Set a low mixing speed. The putty should have a thick consistency, but not seem dry.
- Allow the mixture to stand for at least 10 min prior to application.
- Apply a first coat to the whole wall use small trovel ( 15-20 cm) to add a glob of putty to the large trovel (30 -36 cm) . Apply putty from the bottom to top of the wall in one motion.
- Allow the putty to dry for 16-24 hours. To check for dryness touch the putty with your fingers to feel for dampness.
- Apply the second coat either horizontally or vertically. Second coat shouldn’t more than roughly 1.5 inc thick.
- After 16-24 hours of second coat, go over the entire wall with fine sand paper 300-400 grit wipe off any remaining dust with damp cloth or sponge.
- After 2-3 days prime the whole wall, then add 2 coats of paint.
