Category: ADHESIVE

ADHESIVE-413

HAUTEUR STONE/ GRANITE ADHESIVE-ADHESIVE-413

HAUTEUR-413 is a Granite adhesive is a specialized type of high polymer modified adhesive used for bonding granite or other natural stone surfaces , glass mosaic tiles, pavers and brick. and can provide a long-lasting, beautiful finish for any project.

BENEFITS

  • Ease of application
  • Good work-ability
  • Self curing
  • Cohesive mix
  • Improved adhesion
  • Single component product , only water to be added
  • Longer open time with slip resistant properties

APPLICATION AREAS

  • – Bedding stone slabs & floor tiles/ granite
  • – Bedding stone slabs wall cladding
  • – General slab & tile and granite application
  • – Recommended for tiles used on exterior wall substrates like plaster or concrete
  • – It is also suitable for tile on tile installation
  • – Ideal for window and door cladding

SUITABLE FOR

  • Ceramic tiles
  • Clay tiles
  • Basalt tiles
  • Vitrified tiles
  • Glass mosaic tiles
  • Porcelain tiles
  • All types of natural stone tiles

PACKAGING

  • Product available in 20 kg bag
  • bag color – Green
  • Appearance of product – grey/ white

USAGE INSTRUCTIONS

  1. Clean the substrate of oil strains and bond inhibiting compounds. Also remove any loose particles dirt, dust.
  2. Ensure that the surface is well saturated before application in the case of cement based substrates.
  3. Mix as per mixing ratio of 3 – 4 liter per 20 kg bag
  4. After mixing allow the paste to stand for 3 -5 min for it to mature.
  5. Mix again to get the right consistency
  6. Apply the adhesive on surface
  7. Lay the granite/ stone on the adhesive
  8. Tap using plat plank with rubber mallet
  9. After 24 hours apply grout to finish the surface

WALL TILE ADHESIVE-411

HAUTEUR WALL TILE ADHESIVE-ADHESIVE-411

HAUTEUR Tile adhesive-411 is a polymer modified cement based tile adhesive for fixing ceramic tiles of regular size on the wall and floor and porous natural stone on the floor. For internal floor and wall areas , for fixing tiles.

BENEFITS

  • Ease of application
  • Good work-ability
  • Self curing
  • Cohesive mix
  • Improved adhesion
  • Single component product , only water to be added
  • Longer open time with slip resistant properties

APPLICATION

  • – Bedding Floor tiles
  • – Bedding Wall tiles
  • – General tile application
  • -It is recommended for both interior and exterior use

SUITABLE FOR

  • Tiles with an apparent porosity of less than 3%
  • Vitrified or fully vitrified tiles
  • Glass mosaic tiles
  • Dense stones
  • Large sized tiles greater than 300 mm * 300 mm

PACKAGING

  • Product available in 20 kg bag
  • Bag color – Red
  • Appearance of Product – Grey/white

USAGE INSTRUCTIONS

  1. Clean the substrate of oil strains and bond inhibiting compounds. Also remove any loose particles dirt, dust .
  2. Ensure that the surface is flat (hard and rigid) for the given application.
  3. Ensure that the surface is well saturated before application in the case of cement based substrates.
  4. Mix 3-4 liter of pure water for every 20 kg premix bag
  5. After mixing allow the paste to stand for 3-5 min for it to mature.
  6. Do not attempt to extend the pot life by adding more water to the mix
  7. Apply adhesive over the surface using the straight edge of the notched trowel. If the adhesive is buttered to the tile , then ensure proper coverage of tile surface to avoid avoids.
  8. After 24 hours grouting can be done on tiles and stones.
MSDS-HAUTEUR-ADHESIVE-411-.Download

FLOOR TILE ADHESIVE-402

HAUTEUR FLOOR TILE ADHESIVE-ADHESIVE 402

HAUTEUR-402 is a Cement-based adhesives are the most commonly used type of floor tile adhesive. They are made from a mixture of cement, silica sand, and additives and are typically used for porcelain, ceramic, and natural stone tiles. These adhesives are easy to mix and apply, and they offer good bond strength.

BENEFITS

  • Ease of application
  • Good work-ability
  • Self curing
  • Cohesive mix
  • Improved adhesion
  • Single component product, only water to be added
  • Longer open time with slip resistant properties

SUITABLE FOR

  • Bedding floor tiles
  • General floor tile application

PACKAGING

  • Product available in 20 kg bag
  • Bag color – Yellow
  • Appearance of product – Grey / White

USAGE INSTRUCTIONS

  1. Clean the work area , should be free of grease , dust etc,.
  2. Add approx 3-4 liter of pure water for every 20kg premix bag
  3. wait for 3-5 min
  4. Mix again to get the right consistency
  5. Apply the Adhesive on the surface
  6. Lay the tile on the adhesive
  7. Tap using a flat plank with a rubber mallet
  8. After 24 hrs apply grout to finish the surface