Category: PRODUCTS

WALL TILE ADHESIVE-411

HAUTEUR WALL TILE ADHESIVE-ADHESIVE-411

HAUTEUR Tile adhesive-411 is a polymer modified cement based tile adhesive for fixing ceramic tiles of regular size on the wall and floor and porous natural stone on the floor. For internal floor and wall areas , for fixing tiles.

BENEFITS

  • Ease of application
  • Good work-ability
  • Self curing
  • Cohesive mix
  • Improved adhesion
  • Single component product , only water to be added
  • Longer open time with slip resistant properties

APPLICATION

  • – Bedding Floor tiles
  • – Bedding Wall tiles
  • – General tile application
  • -It is recommended for both interior and exterior use
  • Tiles with an apparent porosity of less than 3%
  • Vitrified or fully vitrified tiles
  • Glass mosaic tiles
  • Dense stones
  • Large sized tiles greater than 300 mm * 300 mm

PACKAGING

  • Product available in 20 kg bag
  • Bag color – Red
  • Appearance of Product – Grey/white

USAGE INSTRUCTIONS

  1. Clean the substrate of oil strains and bond inhibiting compounds. Also remove any loose particles dirt, dust .
  2. Ensure that the surface is flat (hard and rigid) for the given application.
  3. Ensure that the surface is well saturated before application in the case of cement based substrates.
  4. Mix 3-4 liter of pure water for every 20 kg premix bag
  5. After mixing allow the paste to stand for 3-5 min for it to mature.
  6. Do not attempt to extend the pot life by adding more water to the mix
  7. Apply adhesive over the surface using the straight edge of the notched trowel. If the adhesive is buttered to the tile , then ensure proper coverage of tile surface to avoid avoids.
  8. After 24 hours grouting can be done on tiles and stones.

FLOOR TILE ADHESIVE-402

HAUTEUR FLOOR TILE ADHESIVE-ADHESIVE 402

HAUTEUR-402 is a Cement-based adhesives are the most commonly used type of floor tile adhesive. They are made from a mixture of cement, silica sand, and additives and are typically used for porcelain, ceramic, and natural stone tiles. These adhesives are easy to mix and apply, and they offer good bond strength.

BENEFITS

  • Ease of application
  • Good work-ability
  • Self curing
  • Cohesive mix
  • Improved adhesion
  • Single component product, only water to be added
  • Longer open time with slip resistant properties

SUITABLE FOR

  • Bedding floor tiles
  • General floor tile application

PACKAGING

  • Product available in 20 kg bag
  • Bag color – Yellow
  • Appearance of product – Grey / White

USAGE INSTRUCTIONS

  1. Clean the work area , should be free of grease , dust etc,.
  2. Add approx 3-4 liter of pure water for every 20kg premix bag
  3. wait for 3-5 min
  4. Mix again to get the right consistency
  5. Apply the Adhesive on the surface
  6. Lay the tile on the adhesive
  7. Tap using a flat plank with a rubber mallet
  8. After 24 hrs apply grout to finish the surface

AAC BLOCK JOINTING MORTAR

HAUTEUR JOINTING MORTAR-MASONRY COMPONENT

Hauteur masonry mortar is a silica sanded product fortified with OPC-53 Portland cement and additives and special polymers for block jointing and adhesive application.

BENEFITS

  • Ready to use, only need to add water
  • Self curing
  • Better water retention
  • Improved adhesion
  • Improves the overall masonry strength
  • Economical as quantity of mortar and price
  • Reduces labour cost and save time

SUITABLE FOR

  • Autoclaved Aerated Concrete (AAC) block bonding
  • Cellular Light Weight (CLC) block bonding
  • General block bonding application

PACKAGING

  • Product available in 40 kg bag
  • Bag colour – RED
  • Appearance of product – Grey powder

USAGE INSTRUCTIONS

Add approx 6-7 ltr of pure water for every 40kg premix bag

Mix with materials

wait for 3-5 min

Mix again to get the right consistency
Pre wet the blocks thoroughly with clean water
Apply a uniform layer of
2-3 mm thickness on the work area
Tap using a flat plank with a rubber mallet

Apply mortar at beams and columns for better bonding