HAUTEUR WALL CARE PUTTY

BENEFITS

• Ease of application
• Good work ability
• Improved adhesion
• It is resistant to moisture
• Good tensile adhesion strength, compressive strength and extramural strength
• Resists growth of algae and fungi on wall
• Wall putty provides a smoother finish
• Wall putty increase the lifespan of the wall paint

SUITABLE FOR

• For Exterior and Interior before paint application
• Can be used for repair cracks on wall

PACKAGING

• Product available in 40 kg bag
• Bag color – Blue
• Appearance of product – white powder

USAGE INSTRUCTIONS

1. Scrap off or sand down chips, flakes and bumps. If working with older walls use a paint scraper/ coarse sand paper 40-60 grit to remove loose chips and flacking paint
2. Use a dry brush over the entire wall to remove any remaining chips/flacks. Wipe and moisten the wall with a clean sponge and water.
3. Add 40-45 % of water by volume to the hauteur wall care putty powder.
4. Mix thoroughly using mechanical stirrer to make a homogeneous past. Set a low mixing speed. The putty should have a thick consistency, but not seem dry.
5. Allow the mixture to stand for at least 10 min prior to application.
6. Apply a first coat to the whole wall use small trovel ( 15-20 cm) to add a glob of putty to the large trovel (30 -36 cm) . Apply putty from the bottom to top of the wall in one motion.
7. Allow the putty to dry for 16-24 hours. To check for dryness touch the putty with your fingers to feel for dampness.
8. Apply the second coat either horizontally or vertically. Second coat shouldn’t more than roughly 1.5 inc thick.
9. After 16-24 hours of second coat, go over the entire wall with fine sand paper 300-400 grit wipe off any remaining dust with damp cloth or sponge.
10. After 2-3 days prime the whole wall, then add 2 coats of paint.